Running other Diagnostic Tests (NIBP, SpO₂ etc)
While the ECG is running, other tests can be performed simultaneously. These are available under the "Options" menu. They are also available under the following function keys:

- F2 performs an NIBP cycle. The resulting Systolic and Diastolic are reported on the screen and to the database if the run is stored

- F5 performs a temperature monitoring test. This test runs repeatedly every few seconds. When F5 is pressed again the results are displayed, and the temperature monitoring is stopped

- F6 performs an SpO₂ reading. When determined, the results are displayed on the screen and stored to the database when the run
is stored

- F8 performs a scale reading. Make sure the scale is on and the patient is standing on the scale. When determined, the results are displayed on the screen and stored to the database when the run is stored

- Control-F5 performs a read from the glucose meter. When determined, the results are displayed on the screen and stored in the database when the run is stored

Note1: NIBP, SpO₂, and Temperature can be run without starting ECG

Note2: these vitals values are available under the "Demographics/Chart" button in the database and are shown in various reports, tables, and graphs (mostly noteable in Stress reporting)

System Setup Options
In setup numerous selections are available: different types of temperature devices, different types of SpO₂ devices, continuous operations, NIBP cycle times, NIBP inflation pressure, etc.

Clicking on "Multi Test" offers numerous display formats and automatic options can be selected: all 12- lead ECG with vitals displayed, trend SpO₂ (store SpO₂ continuously), automatic sequencing, etc.

Clicking on "Limits Alerts" allows the setting of min and max limits.